Bow Blues

Bow Blues After preparing the laminations, bending form and heat box for the fiberglass longbow I planned to build, I mixed the epoxy—and promptly began to mess up the entire project. First, I [...]

Marking Gauge Refills

The blade of a marking gauge must be as sharp as a scalpel in order to cut a fine line across the grain. Sharpening it can be very difficult because it’s so small. I solved that problem by [...]

Gambler’s Micro-Adjust

Gambler’s Micro-Adjust Precise fence adjustments are a sure bet when I clamp this shop-made device on my router table. I simply drilled and tapped a hole to accept a 1/4″-20 machine screw [...]

Pants on Fire

Pants on Fire When Daylight Savings Time begins, I make it a point to change the batteries in the three smoke detectors in my workshop. It was that time again, so I bought new 9-volt batteries [...]

No-Wobble笔芯棒

While turning wooden pens, students in my woodshop classes kept wearing out the points on the live centers of our mini lathes. The points fit into the hollowed end of the pen mandrel. If the [...]

Edge-Knot Repair

Filling knots with colored epoxy usually works quite well, but sometimes the void is in a spot that’s difficult to fill, like the edge of a board. Here’s how to do it. First, apply some paste wax [...]

Mouse vs. Mint

Mice used to rule my shop. They got into everything! That all changed when someone told me that fresh mint repels mice. Mint grows wild in one corner of my yard (it’s a perennial and comes back [...]

自定义Chamfering Plane

Chamfering an edge with a block plane is often easier, faster and safer than using a router or tablesaw—particularly on a small part. I do it so often that I’ve dedicated one of my planes for the [...]

Spindle-Sander Sharpening

Here’s a simple way to sharpen chisels using a 3″ sanding drum mounted in an oscillating spindle sander or a drill press. Cut a squared-up 2×4 the length of the sander’s table. Cut a [...]

Vacuum-Hose Dust Control

Dust is a real problem when you can’t use a router table’s fence and its dustport. Here's a clever way to suck up that dust using your shop vacuum's nozzle.

Lamp Safety Screen

My lathe came with a lamp, but the lathe’s manual has this weird warning: “Position the work lamp so that wood chips do not accumulate inside the lamp shade and pose a fire hazard.” Now, [...]

Mini Shelf Pins

For small cabinets, I prefer to use small, discreet shelf pins that I make myself. I also make sleeves for the pins to fit into. Sleeves help hold the pins firmly in place. I make the pins from [...]

1 2 3 4 5 6 7 8 9 ...
page1of119

Start typing and press Enter to search

Baidu
map